Welcome To Moda Fabrics!

Just Keep Swimming Quilt

Just Keep Swimming Quilt

Written by: 
Jen Daly

jkscover - bold

Hi there!  My name is Jen Daly and I'm thrilled to be sharing my first Moda Bake Shop recipe with you today!  Just Keep Swimming is a fast and fun little quilt featuring tropical fish swimming around colorful patchwork.  To make Just Keep Swimming, you'll only need 1 mini charm pack (love mini charm packs!!) and a 1/2 yard of a complementary background fabric.  I chose Kate Spain's gorgeous "Paradiso" for my version of Just Keep Swimming -- perfect for summer!  Hang Just Keep Swimming on a wall, display it on a table, or even turn it into a pillow.  Just have fun!!

 

8cb62-title_ingredients

jks1 resize

  • 1 Mini Charm Pack (shown in Paradiso by Kate Spain)
  • 1/2 yard background/binding fabric (shown in Royal Blue Bella Solid)
  • 2/3 yard backing fabric (shown in Paradiso Lagoon Blue Bonaire)
  • batting measuring 20" x 20"
  • white size 8 perle cotton
  • light-colored marking pencil

Also Helpful:

  • spray basting adhesive
  • sandpaper board

 

96b91-title_instructions

Before cutting, spend a few moments sorting your mini charm squares.  You'll need to reserve 16 mini charm squares for the center of the quilt and you'll be using 24 (2 each) for the 12 fish blocks -- you'll have 2 squares left over.

Here's how I sorted mine.  For the patchwork center of the quilt:

jks2 resize

 

For the fish blocks:

jks3 resize

 

Cutting Background Fabric:

First cut your background fabric into the following:

  • 3 strips 1 1/4" x WOF (width of fabric - or one selvage edge to the other)
  • 4 strips 1 1/2" x WOF
  • 3 strips 2 1/4" x WOF (for binding - feel free to adjust the width to suit your preference)

jks9 resize (1000x842)

Further cut your strips into the following:

  • from the 3 - 1 1/4" x WOF strips:
    • 72 - 1 1/4" x 1 1/4"
  • from the 4 - 1 1/2" x WOF strips:
    • from the first strip, 12 - 1 1/2" x 2 1/2"
    • from the second strip, 4 - 1 1/2" x 9 1/2"
    • from the remaining two strips, 4 - 1 1/2" x 15 1/2"
  • reserve the 3 - 2 1/4" x WOF strips for binding

jks10 resize (1000x719)

 

Cutting Mini Charm Squares:

Each fish block is made of 2 mini charm squares -- one for the front and the back of the fish, and one for the middle stripe and the tail.  Gather 12 sets of 2 squares for each fish.  Cut each mini charm square in half -- each half should measure 1 1/4" x 2 1/2".

jks8 resize (1000x519)

 

Assemble Fish Blocks:

On the back of each of 72 background fabric 1 1/4" x 1 1/4" squares and using a light marking pencil, draw a diagonal line from corner to corner.  Note:  placing the squares on a sandpaper board before drawing the lines helps to keep the fabric from shifting or distorting as you draw the lines.

jks11 resize (1000x778)

 

For each fish:

Place fish front, back, and tail mini charm 1 1/4" x 2 1/2" rectangles on flat surface with right sides up (reserve the fish stripe 1 1/4" x 2 1/2" rectangle for later use).  Place 1 background fabric 1 1/4" x 1 1/4" on each rectangle with drawn line visible as follows:

jks12 resize

Stitch along drawn lines.  Press towards the background fabric for the front and back of fish and towards the print for the fish tail:

jks17

Trim excess fabric a scant 1/4" from seams:

jks18

Place 1 background fabric 1 1/4" x 1 1/4" on fish front, back, and tail units with drawn lines visible as follows:

jks19

Stitch along drawn lines.  Press towards the background fabric for the front and back of fish and towards the print for the fish tail:

jks20

Trim excess fabric a scant 1/4" from seams:

jks21

Lay out fish front, stripe, back, and tail units as follows:

jks22

Stitch together fish front and stripe and fish back and tail:

jks23

Stitch together fish stripe and fish back to make a finished fish.  Fish block should measure 2 1/2" x 3 1/2".

jks24

Repeat to make 12 fish blocks:

jks25

 

Assemble Quilt Center:

Lay out 16 reserved mini charm squares as desired in 4 rows of 4 each:

jks4 resize

Stitch mini charm squares together in rows:

jks5 resize

Stitch together rows.  Finished center should measure 8 1/2" x 8 1/2":

jks6 resize

Press seams in each row in one direction, alternating direction row by row:

jks7 resize

 

Add Inner Borders:

Note:  I added all borders using a partial seam method.

Place a background fabric 1 1/2" x 9 1/2" atop right edge of quilt center with right side of quilt center facing up and aligning rough edges.  The top edge of both the quilt center and the inner border strip should line up, but the border strip should extend 1" beyond the quilt center:

jks26

Stitch along edge, stopping at least 2" before end of border strip.  Press towards inner border:

jks27

Place a background fabric 1 1/2" x 9 1/2" atop top edge of quilt center with right side of quilt center facing up as follows:

jks28

Stitch top inner border to quilt center.  Press towards inner border:

jks29

Repeat steps to add left side inner border:

jks30

Repeat steps to add bottom inner border.  Note:  make sure to tuck the bottom of the right side inner border out of the way before stitching -- see bottom right corner of photo:

jks31

Finish stitching the right border seam:

jks33

Here's a close-up of the bottom right corner prior to stitching:

jks34

And here's what the stitched together quilt center and inner borders should look like.  At this point, the quilt should measure 10 1/2" x 10 1/2":

jks35

 

Assemble Fish Borders:

Referring to quilt, lay out quilt center unit, 12 fish blocks, and 12 - 1 1/2" x 2 1/2" rectangles as desired:

jks36

Each fish border will include 3 - 1 1/2" x 2 1/2" rectangles and 3 fish blocks as follows:

jks37

For each border, stitch together 1 1/2" x 2 1/2" rectangles and fish blocks.  Press seams towards the 1 1/2" x 2 1/2" rectangles:

jks38

 

Add Fish Borders:

The fish borders are stitched to the quilt center unit using the same partial seam method demonstrated above.

jks39

Place 1 fish border atop right edge of quilt center unit with right side of quilt center unit facing up and aligning rough edges.  The fish border should extend 2" beyond the quilt center unit.  Stitch, making sure to stop sewing at least 3" from the end of the fish border.  Press towards inner border:

jks40

Repeat steps to add top fish border:

jks41

Repeat steps to add left fish border:

jks42

Repeat steps to add bottom fish border, again making sure to tuck the bottom of the right side fish border out of the way before stitching :

jks43

Finish right edge seam and press well.  Quilt should now measure 14 1/2" x 14 1/2":

jks45

 

Add Outer Borders:

Using the same partial seam method, add the 4 - 1 1/2" x 15 1/2" outer borders pressing seams towards the outer borders.

Add the right side (stop stitching at least 2" from edge of border strip):

jks46

Add the top border:

jks47

Add the left border:

jks48

Add the bottom border:

jks49

Finish stitching the right side seam.  Press well.  And voilà, you've finished your quilt top!

jks50

 

Finish Quilt:

Layer the quilt top with batting and backing.  Baste and quilt as desired.  Because of the small size of this quilt, I chose to baste it using spray basting adhesive between the three layers.  To quilt, I used size 8 white perle cotton and a big stitch in a cross hatch pattern for the patchwork center.  I also quilted on either side of each fish's stripe and finally, I quilted a wavy line in both the inner and outer borders.

 

4b2da-title_yield

IMG_6016 (1000x983)

This recipe yields 1 charming 16" x 16" quilt.  If you'd like to make Just Keep Swimming into a pillow, consider increasing the dimensions of your outer border strips to 1 3/4" x 15 3/4."  This would allow for a 1/2" outer seam allowance and would still result in a 16" x 16" finished pillow top.  Good luck!

Jen Daly
{jendalyquilts.blogspot.com}